harmony remote software mac os

All of this should work on Mac OS X and . Luckily, both distribute and pip can be easily installed with python scripts that are.

Does anyone know how I can solve this!? WOuld be so grateful for any advice. But the program I am trying to use seems to be ignoring the host file. Is there a second or third alias file I should be editing as well? Bookmark the permalink. I am using xamp as my server package.

I have instructions telling me to change these lines:. Upon typing a url address on the browser, the system is checking if there is a relevant entry on the hosts file and gets the corresponding IP address, else it resolves the IP via the active connection's DNS servers. Hello its my host file Host Database localhost is used to configure the loopback interface when the system is booting. Instruction say to go to help menu and deactivate.

Edit your hosts file. If you insist, the host file can be found using this link You should be able to follow the router section and config section verbatim. Once you have your hosts file changed, you can then use the free version of MAMP to host multiple websites on your mac! Makes testing and development a breeze!

For non-jailbroken devices: Host Database localhost is used to configure the loopback interface when the system is booting. For Jailbroken devices: Host Database localhost is used to configure the loopback interface when the system is booting. I tried to modify my hosts file in order to access facebook because it is blocked in my country. However, I deleted all the info from my root hosts system by mistake. Please help me to get anything that was original from my hosts file. This only happened in one of the 3 new macbook pro i purchased…All of the other oppens the host file with text edit normally.

It just goes to the next line ready for another command. To make that work, I also had to map After the terminal prompt the passwords, I try to put my user passwords. However, I could not type anything at all. Until I press ctr and c it now allow me to type. When I type my user password it can not found.

What should I do to edit my host file. However, the speed is abit slower though.. Then use textwrangler to open the hosts file to edit. Awesome issues here. I am very glad to see your article. Thank you so much and I am having a look ahead to touch you. Will you kindly drop me a e-mail? The Mac is clean computer is that normally? Please double-check your typing when using sudo. Just copy paste the exact commands from the post above. If you are on Mac than you can check this tutorial. Abode Hosts […]. If you use your Mac like a windows PC, then you can ignore the last command and just restart your Mac.

That works as well. But there is a small problem that these products are not free so you need to purchase them in order to unlock their full potential. So I just gathered few serials which can be used to make these products full version and boost your creative performance. So below I have created a full tutorial on how you can use these serials, as you need to mod your Hosts file to get them accepted.

If you do not follow steps accordingly than you might not be able to get them into work so check out tutorial carefully. First step is to install your product as a trial version, well you can install them individually or you can install Master Collection. So after you have installed your product do not run it just close it and than go to Start and search for Notepad and run it as an administrator. After tracing through these forums and much confusion I have just edited the Network settings to ensure that there wasnt a conflicting IP address Instead of editing the host file.

I belive this is all that that is being edited within the host file. I have managed to set it up this way and its all running fine. Its usually allways just the simple things, However many people for get to check these first, myself included. Vickie do you press enter after you wroth your good password? Reblogged this on pakholeungprofile. Now save this file and run your Adobe CS5 Product.

There are different serials for Windows and […]. Tagged config, hosts, osx. This is what solved it for me: The line ending of my hosts file were Mac Classic CR , which is wrong. Boom, worked. How do you delete something like a giant list that has just been imported without pressing the delete key over and over again for 15 years? To me, moving to Mac has been some learning experience. Little tips from forums like this really make a huge difference.

So now you have completed the main step which will help you in getting your serial accepted, […]. Editing this file you can, for example, change the less than memorable I have a problem with this. You can duplicate this document and edit the duplicate. Only the duplicate will include your changes. I am logged in as admin and I have written my password. All I want to do is to permanently block a stubborn pop-up ad website that freezes Safari down.

If anybody can help me, I would be very thankful. Some ahole copied your work — without even bothering to say thanks. I hope that Google will take care of the duplicate content, and rank it appropriately. Thanks for mentioning it! You can verify that your hosts file is being picked up by your OS by […]. Hello, I have an issue, yesterday I did everything as listed on here and my PS5 stopped working it tells me it cannot be opened because it may be damaged or incomplete.. Btw, how about in VIM? How can I save?

I tried to use Command S, but it saved in a different directory. This is how I edit my Hosts file on the Mac. Windows users can do a version of the same thing, and there are also plug-ins for […]. Thanks decoding! He has some other network related information at his website if you need more help. I tested this […]. Just blocked a couple of pages that I waste my time on frequently during the exam prep period.

I turned on my apache server and my fancy page telling myself to study and mapped the sites to Mountain Lion Grapii You'll need to add the […]. I promise. Comments RSS. You are commenting using your WordPress. You are commenting using your Google account. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email.

Create a free website or blog at WordPress. Right click CMD. I guess, it has something to do with your admin privileges. Need step-by-step please! And pushing Command on its on does nothing. You need to type that into a terminal and press enter. You already did it. It might immediately start to fill up as soon as you access anything online because that requires DNS resolving. This same thing happens to me. The same sites remain there after flushing and it says that the flushing is successful.

Setting the cache to flush automatically after say 10 seconds could be useful. However, I cannot find the MaxCache parameter in the location you specify in my Windows 7 registry. Does it need to be added manually? If so, can you tell me how to do it, so I can give it a try? Microsoft Support has detailed instructions for the registry, along with how to add your own. I would still try a suggestion from this comment. Keep up the great work! You know, many individuals are looking around for this information, you could aid them greatly.

I flushed my DNS on my laptop. Then I stopped the DNS server on services. When I check my domain using several check dns tools, the domain seems to resolve to the proper new ip-location. If if manually edit the hosts file I can have the browser to the new location.

You need to set the right path to the command. My laptop runs on windows vista and i keep trying to flush it but it keeps telling me that request needs elevation. I dont really know what that means so i dont know what to do. Try running the command prompt as an administrator and then put in the required commands. What now? My Laptop runs on Windows XP. Actually, DNS caching is persistent on many distributions, so restarting nscd will not flush the cache. Define your site main menu.

How to Flush DNS. Follow Us! Rate this article:. How to Flush DNS , 3. Mail this article Print this article. How to Reset a Netgear Router. You can try sudo or su commands though… Reply. Fixes a problem that caused the Tunnelblick icon to show the connection status incorrectly. Fixes two problems that caused settings to change without the user requesting the change. Fixes a problem starting more than one configuration 'when computer starts'. Fixes a problem disconnecting configurations set to start when the computer starts.

Fixes several minor memory leaks. Changes to Tunnelblick's handling of computer sleep: Adds a 'Disconnect when computer goes to sleep' checkbox on the 'Advanced' settings window; it is checked by default. Checks for apparent IP address changes asynchronously. Sets timer tolerances on Mavericks for lower power use. Complains about files whose paths contain prohibited characters. Increases the number of status windows allowed on the screen from 64 to Moves 'Show configuration on Tunnelblick menu' to the Advanced settings window. Fixes a memory leak that would occur only under very unusual conditions.

Fixes a problem that causes the log to 'freeze' under certain circumstances. Fixes a problem when user-supplied scripts output a lot of text to stdout or stderr. Fixes an error in the Italian IT localization. Verifies that kexts and digital signatures are secured. Verifies that everything in the application is writable only by root. Checks that the system folders used by Tunnelblick are secure.

Recovers more gracefully from OpenVPN crashes. Includes better help on the 'Advanced' settings page. Fixes a problem that did not allow. Uses digitally signed tun and tap kexts on OS X Recovers more gracefully from some crashes. Fixes a typo in the ES Spanish translation. Fixes a problem that sometimes caused a spurious entry in the Console Log. Fixes problems when there are no configurations. Fixes a problem displaying the hex code for invalid characters in files. Fixes a typo in message sent to the Console Log about 'login intems' changed to 'login items'. Includes a better Console log message when a sound is not found.

Option-click on a checkbox allows the option of changing a setting for all configurations. Checks that additional system folders are secure. Some error messages were made clearer and more specific. Clarifies help on the 'Advanced' settings page. Verifies the digital signature of Sparkle framework. Verifies that everything in the application is only writable by root. Attempts to display an error message in a GUI window if it can't display normal windows.

Signs kexts for Mavericks. Includes additional logging of ownership changes made by installer. Fixes crash when accessing checkboxes on 'Advanced' window. Includes a Sparkle patch to allow downgrades to stable versions from beta versions. Removed unused files English. Adds stack trace to Console Log on fatal error; removes debugging entries from Console Log. Fixes a problem that causes the log to 'freeze' under certain conditions. Fixes a problem when Tunnelblick scripts output a lot to stdout or stderr.

Fixes a problem on Mavericks that caused Tunnelblick to crash on launch on some systems. Includes OpenVPN version 2. Adds the ability to always use the latest OpenVPN version that is available. Fixes a problem that caused openvpn and down-root. Fixes a problem disconnecting configurations using the down-root plugin if killall is allowed. Fixes a problem that failed to keep a configuration selected after it was renamed.

Fixes a problem verifying digital signatures of Deployed versions of Tunnelblick. Fixes a problem that could cause double-freeing of memory. Fixes a problem that could cause the the status window to show incorrect statistics. Fixes a problem that could cause credits on Info panel to appear in an incorrect font. Fixes a problem converting OpenVPN configuration files that have backslashes in paths. Fixes a problem that caused Deployed versions to ignore forced preferences.

Adds additional DNS information to the Tunnelblick log. Fixes a problem in the build of OpenVPN 2.

How to Flush DNS

Fixes a problem updating the configurations display when a configuration is added or deleted. Fixes a problem that caused warnings about obsolete preferences. Diagnostic information now includes the user's status as a 'standard' or 'admin' user. Enhances installation of Tunnelblick VPN Configurations with improved error detection and correction.

The user can now replace an existing configuration with a new one. Tunnelblick now complains about files referenced in the OpenVPN configuration file that do not exist or are accessed via a path instead of just a filename. Tunnelblick now removes CR characters from script files. Allows Tunnelblick. Updates LZO to version 2. Updates the help displays. Changes to the maximum log size now take effect immediately. Fixes a problem that sometimes caused the last part of the log to be hidden.

Displays dialog when a fatal error occurs. Clearer error messages when a menu icon set is not found. No longer checks for unsigned updates. Adds Erwann Thoraval in the credits for French translations on the Info panel for all languages. Fixes problems indenting configuration subfolders properly in the VPN Details window.

Fixes misspelling of 'Disconnect' in status window. Fixes bug that caused the Tunnelblick icon to disappear when an aborted logout takes place. Fixes bug that caused reverting a configuration to its last secure shadow copy to fail. Fixes warnings about unknown preferences. Fixes a delay when disconnecting if only one configuration is connected. Secures the easy-rsa folder and its contents. Fixes bugs in Sparkle Updater's isDeployed and hasDeployBackups detection Fixes a bug that caused a log message to show permissions as decimal instead of octal.

Defaults to use the oldest version of OpenVPN available, instead of the newest version. Adds a subcommand to openvpnstart to revert a configuration to when it was last secured. Does not warn about Tunnelblick being unsigned if Debug build. Fixes a problem if a configuration was Deployed and needed to be secured. Fixes several problems running Tunnelblick on OS X Fixes a bug that sometimes caused Tunnelblick installations to fail.

Installs even if there are OpenVPN configurations. Recognizes files with '. Checks Tunnelblick's digital signature, and warns the user if it is missing or invalid. Fixes a problem that caused configurations in submenus not to be sorted properly. Fixes problems installing from a disk image. Fixes a problem displaying a shortened log on OS X Fixes security issues raised by Tunnelblick Issue Fixes problem detecting Deployed versions of Tunnelblick. Otherwise, if a 'welcomeURL' preference exists and is being forced, that URL will be displayed as a welcome screen when Tunnelblick is launched.

If a 'skipWelcomeScreen' preference exists and is true, the welcome screen will not be shown. Fixes incorrect display of VPN traffic statistics. Shows ' Deployed ' in the Info panel for Deployed versions of Tunnelblick. Fixes several problems caused by digital signatures. Fixes a problem in the standard down script for TAP connections. Fixes a problem that caused DNS cache flushes to fail silently.

Changes to Sparkle Updater to prepare for later releases 3. Fixes a crash of the Tunnelblick UI in certain complex circumstances. Fixes a problem causing the Tunnelblick icon to disappear. Fixes a problem with OpenVPN version 2. Enhances security by making all of the application's contents owned by root. Fixes bug when on OS X Fixes Issue notification windows overlapping each other. Fixes some compiler warnings from Xcode 4. When the pointer mouse is over the Tunnelblick icon in the menu bar, the notification windows for all configurations that have been active since Tunnelblick was launched are displayed.

Notification windows do not fade away if the pointer is over any notification window or the Tunnelblick icon, as described above. Notification windows for disconnected configurations have a 'Connect' button. Adds Openvpn 2. A 'Run easy-rsa in Terminal' button. Click the '? Includes OpenSSL 1. Does not try to connect if the OpenVPN log file could not be created. Includes more debugging information when OpenVPN starts or fails to start. Includes preparations for Mountain Lion. Logs explanations of why a disconnection occurred. Fixes a bug in log display of the command line used to start OpenVPN cosmetic problem.

Fixes a bug causing loss of contents in the log display if the log contains invalid characters. Fixes problems with the log display if the display gets large. Fixes a problem when there are no icon sets. Fixes several compiler warnings detected by Xcode 4. Fixes crashes of the Tunnelblick UI under two separate sets of complex circumstances.

Version 3.6

Fixes some French localization. Fixes a problem that caused a restart of the connection as a result of a DHCP renewal. Includes complete Japanese localization by Yoshihisa Kawamoto. Includes fixes to format of Czech localization of credits. Includes additional log entry if ExecuteAuthorized fails. Fixes problems updating Tunnelblick caused by digital signatures on Deployed versions. When installing updates on a non-customized version of Tunnelblick i.

It refers to the Tunnelblick. See Tunnelblick and Digital Signatures for more details. Improved French localization by Olivier Borowski. Removes extra logging by Tuntap kexts introduced in 3. Fixes a problem with configurations set to connect 'when computer starts'. Several changes to preferences and forced-preferences: If the 'doNotShowAddConfigurationMenuItem' preference is set, the 'Add a Configuration' menu item will not be shown even if there are no configurations.

Removed the 'doNotShowOptionsSubmenu' preference. Fixes a bug that tried to create a shadow copy of configuration files that were unsecured in Deploy or Shared. Now asks to secure them instead. Fixes a bug that caused problems for 'connect when computer starts' configurations when the configuration is in a subfolder or the configuration's name contains slashes, dashes, or periods. Fixes a bug that caused a forced 'updateFeedURL' preference to be ignored. Note: this preference can only be forced; an 'updateFeedURL' user preference will be ignored for security reasons.

Fixes a bug that caused the 'updateCheckInterval' preference to be ignored Fixes a bug that caused the 'Notification window' button to be enabled even if the 'connectionWindowDisplayCriteria' preference was forced. Prevents kernel panics on OS X Tunnelblick can now be updated even if its name is not Tunnelblick. You can now select and copy the version information in the Info panel.

Emma Segev and Tjalling Soldatt have provided complete Dutch localization. Peter K. O'Connor has provided complete Chinese simplified localization. Fixes bugs when menu icon sets are not available. Fixes bugs when updating Tunnelblick while a connection is active. Fixes console warning about unrecognized preference.

Complete French localization by Jeremy Sherman. Complete Korean localization by Kyoungmin Kim. Complete Norwegian localization by Jon Luberth. Complete Portuguese localization by Denis Volpato Martins. Adds protection against race conditions in sleeping and quitting. The credits and license description on the Info panel are now localized.

Fixes a bug that didn't update 'Settings' tab items properly when a different configuration was selected in the 'Configurations' panel. Fixes a bug that caused several items to appear in English instead of the preferred language, even if a preferred language translation of the item was available.

Fixes a bug that caused the 'Glass' sound to be used when a tunnel is established and the 'Basso' sound to be used when a tunnel was torn down if the preference for the sound was set to 'None' Fixes a bug that caused the 'Advanced' window to pop up in front of any other application's window when the notification window appears. Fixes a bug that caused the 'Glass' sound to be used when a tunnel is established and the 'Basso' sound to be used when a tunnel was torn down if the preference for the sound was set to 'None' Fixes a bug that caused problems and failed to properly warn the user that a private configuration cannot be set to start when the computer starts.

Fixes several small memory leaks. Added an additional layer of protection against attacks. Fixes a bug that didn't localize some window text. Fixes a bug that failed to remove some credentials when a configuration was removed. Changes to the sound settings take effect immediately.

Shows a splash screen during installation. Cascades status windows when multiple status windows are being displayed simultaneously. Monitors log only when it is being displayed. Makes the log non-editable. Enables Apple help instead of browser-based help when running on Snow Leopard. Fixes problems displaying the 'VPN Details' window when there are no configurations.

Fixes problems renaming a configuration which is in a subfolder. Fixes a small memory leak when the VPN login window is shown. The new 'VPN Details' window: Allows easy management of configurations, including renaming, duplicating, and removing them, and the ability to remove a configuration's credentials from the Keychain. Implements a new facility for installing configurations at the time Tunnelblick is installed, and updating them at any time thereafter.

Installation of these configurations is triggered by including them in 'Tunnelblick Configurations. Thus they can be distributed as part of the normal Tunnelblick update mechanism. The configurations may be updated automatically, separate from the application. Configuration updates like Tunnelblick updates must be digitally signed, or be transmitted over an SSL connection. Configuration updates do not modify Tunnelblick. Fixes problem with Tunnelblick icon not appearing in security dialogs. Fixes problem displaying help on Snow Leopard. Fixes problem with displaying logs for multiple configurations.

Implements 'reset all warnings' better. Includes additional protection against symlink attacks. Fixes a typo in the help page for the "Appearance" preferences. Menu streamlining: The 'Options The top line of the menu now allows the user to 'Disconnect All' configurations. It continues to display the number of active connections, and, if there is only one active connection, now displays the name of that connection.


  1. minecraft animation program mac download.
  2. History of DNS.
  3. free air traffic control game mac.

The 'Disconnect Preferences changes: Most preference changes take effect immediately; none require relaunching Tunnelblick. Fixes a bug that caused 'Set nameserver alternate 1 ' to fail for some TAP connections. Fixes a bug that did not allow Tunnelblick to launch on some OS X Includes complete Portuguese localization by Denis Volpato Martins. Thanks, Denis! Uses much less CPU time processing the log at high 'verb' levels.

Fixes bug that sometimes caused kexts to not be unloaded. If not present, all items are monitored. New 'Set nameserver 3. Higher 'verb' levels may be used without performance degradation: Tunnelblick doesn't process log files until you view the log in the Details window. So you can capture the log using high verb levels, disconnect, and then view the last 10, lines approximately of the log in Tunnelblick.

The log is overwritten each time you connect, and is deleted when Tunnelblick exits. Tunnelblick only tries to load the last 1,, characters of the log file, so long log files don't take a long time to process. Tunnelblick rate-limits queueing of notifications when the log file changes. Tunnelblick 'chunks' additions to the log display.

The log is cleared before each connection attempt is made. Adds translations of additional OpenVPN connection status. Includes changes to avoid two false-positive Xcode 3. Includes complete French localization by Jeremy W.

How to Reset DNS Cache - MacOs (Mac OS X)

Thanks, Jeremy! Fixes problems with fast user switching previously, user switches were ignored, which caused problems if Tunnelblick was used by more than one user and could cause the icon to indicate no VPN connection when one existed : When a user is switched out, all configurations that are not set to "connect when computer starts" will be disconnected unless the per-connection "-doNotDisconnectOnFastUserSwitch" preference is set true. Fixes potential race condition when computer wakes up. Fixes bug that can cause unnecessary warnings about unknown OpenVPN processes. Fixes bug that can cause crashes after connecting to a VPN.

The 'post-tun-tap-load. Thus, the script is executed immediately before starting OpenVPN. The 'connected. The 'reconnecting. This feature will return in more robust form in a future beta release. Fixes a problem trying to set a configuration that is in a subfolder to connect at system start.

Fixes openvpnstart crashes when certain errors occurred. Tunnelblick itself did not crash. Fixes problems when using 'shadow' configuration files. Warns the user when certain unexpected disconnections occur.


  • Safari Running Slow on Your Mac?!
  • read only sd card formatting mac.
  • Subscribe to RSS.
  • How to edit the hosts file in Mac OS X – Leopard.
  • Facebook Page not loading properly in Mac OSX ?
  • Fixes a problem modifying 'Set nameserver' on other-than-the-first connection. The question asked if foo. Now they are unloaded only as needed to make a connection: foo. Fixes bug which prevented Standard users from installing Tunnelblick by double-clicking. Fixes bugs in automatic installation of. The following choices will always be displayed: 'Do not set nameserver' to not use any scripts equivalent to not having a check in the old 'Set nameserver' checkbox' 'Set nameserver' to use the standard Tunnelblick scripts equivalent to having a check in the old 'Set nameserver' checkbox' The following two additional choices will be displayed only if custom scripts are not being used: 'Set nameserver 3.

    Running this version changes the 'useDNS' per-configuration preference from a boolean to a number. This is a downward-compatible change — earlier versions of Tunnelblick may be run after running this version and modifying the 'Set nameserver' selection. The earlier version will consider anything other than 'Do not set nameserver' as if the 'Set nameserver' checkbox were checked.

    Warning: If Build changes the setting to 'Set nameserver 3. Adds the ability to add menu items to the Tunnelblick menu to execute programs e. Fixes issues when usingOpenDirectory and the user's home directory is on a non-Mac platform. Implements a single, system-wide keyboard shortcut command-option-F1 by default to expose the Tunnelblick menu. This make it possible to use Tunnelblick with only a keyboard. The keyboard shortcut may be used whenever Tunnelblick is running - it does not need to be the front-most application.

    A new submenu of the Options submenu has been added to allow the key to be changed to any of the function keys from F1 through F Fixes bugs race conditions when the log view is being updated and whenMenuExtras are added. Tunnelblick now tries up to five times to get the login items, avoiding a timing issue. The log display in the Details window is now read-only from the keyboard. Script log files are kept in the same directory, using filenames encoded with the configuration file path. Log files are created each time a connection is made. The log display now shows the most recent entries.

    Formatting of the log display is improved. Tunnelblick VPN Configurations. Fixes bug that caused. Fixes bug that didn't clean up when installation of a. Modified the up, down, and leasewatch scripts: client. Tunnelblick itself has been modified to use the new scripts, but only if the old scripts are not present.

    That means that an automated build process, for example, which replaces client. The openvpnstart 'bitMask' argument has additional bits that specify options to send to the scripts as described above openvpnstart puts a warning in the OpenVPN log in the Details window if the path to the up or down script is very long, which could result in OpenVPN sending incomplete arguments to the scripts. Tusen takk! Merci beaucoup! Additional Catalan localization by Aleix Dorca. Configurations may now be shared among all users of a computer, or they may be private to a particular user.

    A new button in the 'Details' window makes changing the availability of a configuration easy. The button displays either 'Share configuration' or 'Make configuration private', as appropriate. It is owned by root and may only be modified by administrators. Shared configurations like deployed configurations may only be examined, not edited.

    Method 2 – Manually Clear Cache.DB File

    But you can make it private, edit it, and then share it. It can also include default settings for per-configuration preferences and version information to help manage enterprise distribution of configurations. Tunnelblick VPN Configurations must be installed before they can be used. They can be installed by double-clicking them, or dragging and dropping them on a Tunnelblick icon in Finder but not the Tunnelblick icon in the Status Bar near the Spotlight icon. They can also be automatically installed when installing Tunnelblick by including them in the disk image.

    The user is given the option of installing them as private or shared. Tunnelblick VPN Configurations and their contents are secured.

    Clearing DNS Caches in OS X Yosemite (10.10, 10.10.1, 10.10.2, 10.10.3)

    Key and certificate files, for example, may not be read by the user. The protection is not as robust as that for Deployed configurations, so that users may edit the configuration, but they are secure in the sense that a user is never allowed to use a configuration that has not been authorized by a computer administrator. Tunnelblick can now start Tunnelblick VPN Connections clients or servers when the computer starts: A new option in the Details window is available for Shared and Deployed. When Tunnelblick quits, it closes only those connections which do not have 'when computer starts' selected.

    Thus OpenVPN instances started outside of Tunnelblick will continue, as will those started by Tunnelblick at any time that have 'when computer starts' selected at the time Tunnelblick quits. A checkbox in the window allows the user to 'Do not display this message again, always ignore'.

    There is a preference, 'hookupTimeout' that is the number of seconds to try, with a default of five seconds. Note that these 'when the computer starts' configurations must not ask for usernames, passwords, or private keys. Tunnelblick now deals with the. An load is ignored if the kext is already loaded and an unload is ignored if the kext is in use. Scans the configuration file to determine if 'tap' or 'tun' is being used, and loads only the appropriate kext at connect. Tunnelblick uses whatever is specified in the first 'dev' option in the configuration file.

    New per-configuration preferences can be used to override the automatic detection of which kexts to load at connect: -loadTapKext, -loadTunKext, -doNotLoadTapKext, and -doNotLoadTunKext are all to be prefixed by the configuration name. If both 'load When Tunnelblick launches, it unloads net. The unload will not occur if the kexts are in use — for example, by an instance of OpenVPN started when the computer started. If foo. They are the old Tunnelblick kexts. This simplifies the transition to the new net.

    Editing a configuration file requires it to be unprotected first, even on Snow Leopard. Note that although Tunnelblick cannot run from such a volume, configurations can reside on such a volume, or even on a volume that does not support root ownership of files, such as a network volume or a volume formatted as FAT Configurations on such a volume will be 'shadow copied' to the boot volume before being used.

    This is done automatically for network volumes, and will be done for non-network volumes if the 'useShadowConfigurationFiles' preference is true. Removed extra Console Log message that the program needed repair. Fix omission and improve formatting of openvpnstart command line tool. Fixed bug that sometimes ignored the 'updateSendProfileInfo' preference. Fixed bug that sometimes send partial anonymous profile information when checking for updates.

    Old Release Notes

    Fixed bug that caused wildcard matches of forced preferences to always fail. Fixed bug that sometimes created and used shadow copies of Deployed configurations. Fixes bugs relating to forced-preferences. Added full Norwegian localization and added missing German localization of one string. Out of beta! Displays configuration name in title of "Details" window. Full German localization. Many thanks to Markus Schneider. Adds Chinese localization both simplified and traditional.

    Many thanks to Aming Lau. Installation has been simplified: The Tunnelblick disk image gives instructions to "Double-click to begin" in several languages. Double-clicking starts a small installer. Warns about other copies of Tunnelblick running during an install and offers to stop them. Simply copying Tunnelblick. The "Welcome to Tunnelblick" window now gives the user much more information, and offers the options of creating and editing a sample configuration file or opening the Configurations folder in Finder.

    Uses Sparkle Updater version 1. Updates must be signed with bit DSA signatures. Updating behavior is now controlled by Tunnelblick preferences, which may be forced. Deployers note: many of these preferences should be forced for security reasons in a deployed environment. Tunnelblick's "Details" window now includes detailed information about why a connection was restarted by leasewatch when the 'Monitor connection' checkbox is checked. The program's menu has been streamlined. Note: The 'Edit Configuration' button may be still disabled with a per-configuration preference.

    Enhancements: Displays command line used to launch 'openvpnstart' in the "Details" window. Detects and gives a detailed error message if a configuration file is identical to the sample provided by Tunnelblick. Creates a "Launch Tunnelblick" link in the Configurations folder. Detects, complains, and quits if not running on OS X Added Quick Start Guide to disk image.

    Bug fixes: Fixes bug that caused crashes when started automatically on login on some versions of Leopard and Snow Leopard. Fixes bug that didn't localize the title for the "Details" window. Fixes bug that displayed 'monitoring connection' when 'Set nameserver' is not checked.